Navigation

Electrical Characteristics
- Absolute Maximum Ratings
- DC Characteristics

Electrical Characteristics

Absolute Maximum Ratings

Operating Temperature	-55°C to +125°C
Storage Temperature	-65°C to +150°C
Voltage on any pin	-0.5V to Vcc+0.5V
Maximum Operating Voltage	6.0V

WARNING Exceeding values beyond these absolute maximum values may cause permanent damage to the device and/or card! Operating at absolute maximum rating conditions for extended periods may affect device and/or card reliability.

DC Characteristics

Parameter	Min	Typ	Max	Units
Power Supply Current
Icc: Idle, Vcc=5V, No card		TBA	TBA	mA
Icc: Idle, Vcc=5V, w/card		TBA	TBA¹⁾	mA
Icc: Active (R/W), Vcc=5V		TBA	250²⁾³⁾	mA
Logic Input Low	-0.5		0.2 Vcc⁴⁾	V
Logic Input High	0.6 Vcc⁵⁾			V
Logic Output Low @ Vcc=5V			0.7	V
Logic Output High @ Vcc=5V	4.0			V

^1),
2) Because card active and idle current values vary widely from brand to brand, a maximum cannot be determined. Please refer to your card manufacturers specifications for read/write current consumption values.

³⁾ This is the maximum current that the on-board LDO regulator will supply. Cards that require more power than this are not supported.

⁴⁾ “Max” means the highest value where the pin is guaranteed to be read as low.

⁵⁾ “Min” means the lowest value where the pin is guaranteed to be read as high.