Rogue Robotics WikiDocs

code:library:arduino:roguemp3 - [Compatibility with Arduino 1.X]

tekmage — 2012-12-31T14:13:36-04:00

Rogue Robotics MP3 Playback Module Interface Library Usage DOWNLOAD: NOTE: You will need to make some small changes to the Arduino serial libraries to use this library. This Library has been provided to ease the communications with the Rogue Robotics MP3 Playback Modules:

code:arduino_serial_base_class - [Arduino IDE 1.0+]

tekmage — 2012-12-31T14:12:46-04:00

This page explains how to add a Serial Base Class to the Arduino Serial classes. What is a Base Class? A Base Class lays down some guidelines for how you build a bunch of related classes. In our case we're using serial classes. The base class will give us a set of methods that are available in all of the classes that are based upon it.

ummc:documentation:mechanical_drawing - created

bhagman — 2012-04-09T16:40:56-04:00

[uMMC Mechanical Drawing]

ummc:documentation:ummc-200-a1-dimensions.png - created

bhagman — 2012-04-09T16:35:10-04:00

ummc:documentation:start - added mechanical drawing link

bhagman — 2012-04-09T16:32:07-04:00

Info This documentation is for the latest version of firmware (102.08 or newer). Older firmware documentation can be found at: * Features * Overview * System Diagram * Interface * Electrical Characteristics * Timing Characteristics * Connections * Mechanical Drawing

rpower:start

bhagman — 2011-10-18T15:56:40-04:00

The rPower module is used primarily to power uMMC, uMP3, and rMP3 boards in systems which need external power to operate those modules. It provides a regulated +5VDC output. The supply power for the rPower module can be from +7.5VDC to +12VDC, often from a wall wart, so a 2.1mm barrel jack is provided. The barrel plug must have a positive tip.

start

bhagman — 2011-10-18T15:48:01-04:00

Welcome to the Rogue Robotics Documentation Wiki. You will find information and documentation on our products here. This is a public wiki. Please feel free to add comments or code, and suggest changes to the documentation. Products uMMC Serial Data Module uMP3 Playback Module rMP3 Playback Module Easy SD flash memory data storage for your microcontroller. Easy MP3/WAV playback for your microcontroller. Easy MP3/WAV playback for Arduino and other microcontrollers. rD…

projects:dlt

bhagman — 2011-07-19T14:48:08-04:00

Introduction I've been toying with this idea for a while now, and it's finally time to make it a reality. The “DLT” or Digital Light Table, is a fancy coffee table with a 5 by 5 matrix of lights. It is not something new - plenty of people have made similar designs. The difference with the DLT is that I wanted it to be a fun table that played music and played games, and generally be a centerpiece of conversation.

howto:preallocate_a_file_for_faster_writing - created

bhagman — 2011-06-09T00:07:20-04:00

Because of how Microsoft's FAT file system works, host systems need to extend files frequently when adding more data, and this means that when a cluster boundary is reached, a new cluster needs to be found and added to the file cluster chain. Complicated? Not really, but it does cause timing problems when using a microcontroller to stream data to an SD/MMC card.

tools:rogueupdater

bhagman — 2011-06-01T21:28:27-04:00

The uMMC, uMP3, and rMP3 have the capability to have their firmware updated. This is done through the serial connection to the module. You need to put the module into it's “Update Mode” which usually is done by shorting the UPD pads on the module, or in the case of the rMP3, by shorting pins 2 & 3 of JP6. Once the module is in “Update Mode”, you can use the Rogue Robotics Firmware Update Tool - Rogue Updater - to upload new firmware to the module.

code:update_firmware_through_arduino

bhagman — 2011-06-01T17:05:12-04:00

This example shows how to update the firmware on the uMMC or uMP3 using an Arduino. This is outdated. Please see Firmware Update Tool NOTE: This is only an updater for Windows. The Windows updater only supports “COM1” -> “COM4”, so you will have to make sure your Arduino Serial connection is using one of those. See here for more info.

courses:introduction_to_wiring

bhagman — 2011-05-19T13:19:22-04:00

In the past several years the availability of cheap, easy-to-use microcontrollers has dramatically changed the DIY and interactive art landscapes: now, anybody can learn how to add an electronic brain to their project. Join the revolution in this class, where you'll learn the basics on two popular platforms: Wiring and Arduino.

projects:dlt:dlt-matrixdriver-schematic.png

bhagman — 2011-05-04T00:52:48-04:00

projects:dlt:pinswirings.png

bhagman — 2011-05-04T00:52:10-04:00

ummc:documentation:ummc-200-a1-schematic.pdf

bhagman — 2011-03-18T11:10:15-04:00

rkey:rkey-dims-front.png

bhagman — 2010-11-24T18:29:38-04:00

rkey:rkey-dims-back.png

bhagman — 2010-11-24T12:58:05-04:00

rkey:rkey-frontback-1000px.jpg

bhagman — 2010-11-24T12:56:38-04:00

rmp3:rmp3-100-a1-schematic.png

bhagman — 2010-10-07T11:37:39-04:00

skunkworks:rkey-music-sample-front-1.jpg

bhagman — 2010-09-22T22:27:17-04:00